View 2SC2590_287873.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Power Transistors
2SC2590
Silicon NPN epitaxial planar type
Unit: mm
For low-frequency power amplification Complementary to 2SA1110 I Features
* Excellent current IC characteristics of forward current transfer ratio hFE vs. collector * High transition frequency fT * A complementary pair with 2SA1110, is optimum for the driverstage of a 40 W to 60 W output amplifier * TO-126B package which requires no insulation plate for installation to the heat sink
8.0+0.5 -0.1 3.160.1
3.80.3 11.00.5
3.20.2
1.90.1
0.750.1 4.60.2
0.50.1 0.50.1 1.760.1 2.30.2 3
I Absolute Maximum Ratings TC = 25C
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature Note) *: Without heat sink
*
16.01.0
Symbol VCBO VCEO VEBO ICP IC PC Tj Tstg
Rating 120 120 5 1 0.5 1.2 150 -55 to +150
Unit V V V A A W C C
1
2
1 : Emitter 2 : Collector 3 : Base TO-126B Package
I Electrical Characteristics TC = 25C
Parameter Collector to emitter voltage Emitter to base voltage Forward current transfer ratio Symbol VCEO VEBO hFE1 * hFE2 Collector to emitter saturation voltage Base to emitter saturation voltage Transition frequency Collector output capacitance Note) *: Rank classification Rank hFE1 Q 90 to 155 R 130 to 220 VCE(sat) VBE(sat) fT Cob Conditions IC = 100 A, IB = 0 IE = 10 A, IC = 0 VCE = 10 V, IC = 150 mA VCE = 5 V, IC = 500 mA IC = 300 mA, IB = 30 mA IC = 300 mA, IB = 30 mA VCB = 10 V, IE = -50 mA, f = 200 MHz VCB = 10 V, IE = 0, f = 1 MHz 200 11 20 Min 120 5 90 65 100 1 1.2 V V MHz pF 220 Typ Max Unit V V
3.050.1
1
2SC2590
PC T a
6
Power Transistors
IC VCE
Collector to emitter saturation voltage VCE(sat) (V)
280 TC=25C 3 IC/IB=10
VCE(sat) IC
Collector power dissipation PC (W)
5
(1)With a 100x100x2mm Al heat sink (2)Without heat sink
Collector current IC (A)
160
IB=1.0mA 0.9mA
1
4
120
0.8mA 0.7mA 0.6mA
0.3 25C 0.1 TC=100C -25C
3
(1)
80
0.5mA 0.4mA 0.3mA
2
1
40 (2)
0.2mA 0.1mA
0.03
0 0 40 80 120 160 200
0 0 2 4 6 8 10 12
0.01 0.01
0.03
0.1
0.3
1
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Collector current IC (A)
VBE(sat) IC
Base to emitter saturation voltage VBE(sat) (V)
3 IC/IB=10 3000
hFE IC
400 VCE=10V
fT I E
VCB=10V f=200MHz TC=25C 300
Forward current transfer ratio hFE
1
TC=-25C 100C
1000
0.3
25C
300
TC=100C 25C
Transition frequency fT (MHz)
200
0.1
100
-25C
100
0.03
30
0.01 0.01
0.03
0.1
0.3
1
10 0.01
0.03
0.1
0.3
1
0 -1
-3
-10
-30
-100
Collector current IC (A)
Collector current IC (A)
Emitter current IE (mA)
Cob VCB
80 10 IE=0 f=1MHz TC=25C 60 3
Area of safe operation (ASO)
Single pulse TC=25C
Collector output capacitance Cob (pF)
Collector current IC (A)
1 0.3 0.1 0.03 0.01
ICP IC t=1s t=10ms
40
20
0.003 0 1 3 10 30 100 0.001 1 3 10 30 100 300 1000
Collector to base voltage VCB (V)
Collector to emitter voltage VCE (V)
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of 2SC2590

	To Download 2SC2590 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .